Heat stress is the total heat load on the body from the environment, the work and what you're wearing. When the body can't shed that heat fast enough, workers can develop heat-related illness, from cramps and fatigue through to heat stroke, a medical emergency. For anyone working outdoors, near hot processes or in physically demanding roles, it's a core safety issue.
What is heat stress?
Air temperature is only part of the picture. Humidity slows sweat evaporation, the body's main way of cooling down. Direct sun, radiant heat from surfaces and hot processes, workload, exposure time, acclimatisation, fitness, health, and clothing or PPE that traps heat all add to the risk.
Safe Work Australia and Queensland workplace safety guidance recognise that heat risk depends on more than air temperature alone. Employers must eliminate or minimise heat risks so far as reasonably practicable, which can include rescheduling or cancelling work.
Heat stress guidance in Australia
Every state and territory requires businesses to manage heat as a workplace hazard. Most operate under harmonised WHS laws, where the duty sits with the person conducting a business or undertaking (PCBU). Victoria is the exception: under its Occupational Health and Safety Act 2004, the duty sits with employers. The core expectations are broadly consistent, and the differences lie mainly in each regulator's tools and emphasis.
Australian Capital Territory. WorkSafe ACT expects agreed heat controls to be set out in a workplace heat management plan. It notes that PPE for working in heat may include light, breathable clothing and cooling vests.
New South Wales. SafeWork NSW focuses on the hierarchy of controls, including scheduling, shade, cool rest areas and buddy systems. It suggests rest breaks about every hour, getting longer as conditions worsen, up to 30 minutes an hour. This is guidance that scales with conditions, not a fixed entitlement.
Northern Territory. NT WorkSafe highlights humidity as a key factor and recommends assessment by a competent person using a heat stress index such as Wet Bulb Globe Temperature.
Queensland. Workplace Health and Safety Queensland offers a free Heat Stress (basic) calculator as the first step in a three-level assessment approach. Where heat stroke is a risk, emergency plans must cover it.
South Australia. SafeWork SA notes that WHS laws don't set a "stop work" temperature, though many workplaces include a heat clause in their employment agreements.
Tasmania. WorkSafe Tasmania points employers to Safe Work Australia's heat guide. It also notes that hot, humid indoor workplaces such as foundries, commercial kitchens and laundries carry heat risk too.
Victoria. WorkSafe Victoria notes there's no maximum temperature for stopping work under Victorian OHS laws. Employers must still monitor conditions and manage heat risks.
Western Australia. WorkSafe WA recommends assessment by a competent person using indices such as Wet Bulb Globe Temperature and Thermal Work Limit, and highlights acclimatisation for FIFO workers.
How can workwear affect heat stress?
Protective clothing is essential where workers face flame, arc flash or other hazards, but it can also trap heat and slow sweat evaporation. WorkSafe Queensland notes that long work clothing isn't itself a cause of heat illness, and outdoor workers still need UV protection.
The answer isn't removing or modifying required PPE. It's choosing compliant garments with breathable fabrics, strategic venting, a comfortable fit, and tape and construction that allow appropriate airflow.
Practical ways to reduce heat stress at work
Heat stress prevention is a workplace system, not just a reminder to drink water. Key controls include:
- Schedule heavy work for cooler times.
- Provide shade or cool rest areas near the work.
- Use mechanical aids and rotate tasks.
- Keep cool drinking water close by.
- Plan acclimatisation for new and returning workers.
- Train workers, and have first aid and emergency procedures ready before hot weather arrives.
Recognising the signs of heat stress
Early signs include fatigue, headache, dizziness, cramps, nausea and poor concentration. Confusion, slurred speech, collapse or seizures can indicate heat stroke. If you see these, call 000. SafeWork NSW notes that heat can impair judgement, so workers may not recognise their own symptoms, which is why supervisors and co-workers need to know the signs too.
Choosing workwear for hot conditions
Start with the protection and standards the job requires. Then weigh up fabric weight, breathability, venting, fit, reflective tape design and laundering needs.
A few examples from our FR/ARC range:
- The Men's Shirt Open Front Moisture Management PPE2 is lightweight and breathable, with 50mm flame-resistant perforated tape designed to improve airflow.
- The Men's Shirt Open Front Vented PPE2 has underarm and back venting.
- The Men's Trouser Cargo Vented PPE2 has back leg vents.
- MULTITEK™ garments use lighter fabric in the upper body for breathability and heavier fabric where abrasion resistance matters most.
Reflective tape construction also influences flexibility and airflow. Our guide to Heat-Applied vs Sew-On Reflective Tape explains the differences.
Explore our shirts and trousers, or talk to our team about workwear for your conditions.

